I wrote this post as a troubleshooting guide for anyone having problems running Steam games on Windows 10. As you read on you may well find that the problem is not related to your operating system at all but just in case I have included a few tips for you to try in resolving any issues you may be having. Leading up to what actually worked for me. So I decided to finally boot up Bioshock Infinite in my Steam account, having already completed the first two instalments. However, to my horror after installing the mandatory steam files the game just crashed every time I tried to load it. Therefore, my first port of call was Google where I found an article saying I needed to uncheck ‘Enable the steam Overlay’ in steam. Which I did but it had no effect. I went back to Google and saw an obvious choice due to recently upgrading to Windows 10. The choice was to set the game executable to run in compatibility with Windows 8. As I know Bioshock Infinite worked for me before the upgrade as I had preciously given it a test run. Again, no effect.
If you want to try the former methods you can do so like this:-
To Disable the Steam Overlay, right click Bioshock Infinite in your Steam Library and select Properties. Ensure you are in the GENERAL tab then simply uncheck the Enable the steam Overlay box.
To run the Bioshock Infinite executable file in a different compatibility mode. Go to C:\Program Files (x86)\Steam\SteamApps\common\Bioshock Infinite\Binaries\Win32
There you will find the BioshockInfinite.exe file. Right click it and select properties. Click the Compatibility tab then look for Compatibility Mode and choose the version of Windows you want to test it with. Don’t forget to check run this program in compatibility box then click Apply. Now try running the game.
As the first two methods did not work for me, my third choice was to try something that has worked for me before with steam games crashing. Which was to VERIFY INTEGRITY OF GAME CACHE.
You can do this by right clicking the Bioshock Infinite icon in your Steam Library and selecting Properties. Choose the Local Files Tab then click Verify Integrity of Game Cache.
It’s very time consuming but it has sorted game issues for me in the past. However on this occasion it failed. I will not give up yet though. After Verifying the game cache I once again got a Steam Mandatory installation which failed with the following error message:-
The Steam Servers Are Too Busy To Handle Your Request For Bioshock Infinite. Error Code (53)
Back to Google to find the answer. Basically it turned out to be my Internet Security Software which is Mcafee. I had to disable real time scanning to allow the mandatory steam updates to complete. So Windows 10 was never the culprit. Sorry Bill Gates. Thanks for reading.
Related Posts
How to Configure TP Link Router for Bandwidth Control
How To Watch Your Ultraviolet Movies in the UK for FREE
Philippines UK Embassy in London | Directions and Parking Information
Failed to Create D3D Device Steam Link
How to make a footer stay at the bottom of the page in HTML and CSS
The Best Game Ever Made | Greatest Video Game
English
Arabic
Chinese (Simplified)
Chinese (Traditional)
Croatian
Czech
Danish
Dutch
Filipino
French
German
Greek
Irish
Italian
Japanese
Korean
Maltese
Nepali
Norwegian
Polish
Portuguese
Romanian
Russian
Scottish Gaelic
Serbian
Spanish
Thai
Turkish
Ukrainian
Vietnamese
Welsh
After trying your solutions with no gain, I eventually found the root issue, I believe.
Okay, I’ve been working on this full-time for nearly a week and finally had a breakthrough. The Problem:
Many of my Steam games began failing to load. I.E.:
Bioshock Infinite
Just Cause 2
Deadpool
Borderlands: The Pre-Sequel
Saints Row IV
and probably more I haven’t tried yet.
Most of them were giving me the error in the title.
I tried all of the following to cure the problem…
I verified that my edge firewall wasn’t blocking traffic.
Verified that PC is plugged into the wall.
Disabled windows firewall & windows defender and my Malwarebytes Premium virus protection.
Turned off Steam Overlay.
Disabled Steam Cloud Sync.
Killed any programs that may produce OSD stuff, like FPS counters in Afterburner or EVGA Precision XOC.
Verified cache files.
Uninstalled and re-installed problematic games
First, tried executing steam://flushconfig, reboot, run steam from the steam folder.
Exited steam and deleted clientregistry.blob and restarted steam.
Manually installed the vcredist, dotnet, and DirectX installers from game sub-directories.
Ran msconfig and rebooted in diagnostic startup and tried game.
Moved steam to C:\Program Files (x86)\, and other folders on other drives.
Installed latest geforce drivers
Installed all latest windows updates
re-ran directx 11 install
Uninstalled game and restarted windows into safemode w/networking and tried re-installing it in safemode.
Completely uninstalled steam, along with every steam game.
Manually removing all valve/steam related registry entries.
Re-installed steam & re-installed games
Run steam with admin privileges.
Create the proper steam_appid.txt files for each game.
Creating softlinks to the Steam folder in each game’s executable folder.
And much, much more.
Nothing had any effect. Then I stumbled onto a page where a user named Wildstar had surmised that the error was being thrown because of some failures in the Steam CEG copy protection system that all of the failing games happen to use. It uses some algorithm to create encrypted executables that will only run under the user’s account. So I played around with deleting all of the .exe and .dll files from a game and then letting a validation run to restore the missing files in the hopes that it would produce correctly encrypted binaries. Didn’t work.
Finally, I decided to do everything I could to restore my Steam setup to as default a state as possible. Once I performed the following procedure, every single one of my problematic games returned to normal operation, and in some cases, I had missing saved games suddenly reappear.
In its most recent arrangement, I had my Steam folder on my E: drive because there’s not enough room on my boot SSD for the 600GB of games I own. I also had an app directory on my C: drive that I tried moving some games into to see if running from the boot drive would help. So I had an E:\Steam installation dir and a C:\Steam Library dir, both paths being registered in my Steam Library Folders list.
These are the steps for fixing the CEG issues…
Exit Steam.
Move the SteamApps and UserData folders from your current installation to some safe directory on the same drive you currently have them stored on. Moving these folders will be WAY faster than copying them because all it really does is update each file’s directory chain info without touching the actual contents of the files.
Uninstall steam using Geek Uninstaller. https://geekuninstaller.com/ It will yank out any extra reg entries or junk files after the standard uninstall script ends.
Reinstall Steam into your “C:\Program Files (x86)” and launch it. You will see all of your games greyed out and waiting to be installed.
Pick any game you like at random and begin the install process. It will ask you where you want to install it.
If you plan to have all of your Steam games on your C: Drive, then choose your default install D/L location. If you plan to install some or all of your Steam games on another drive, then choose that drive. In my case, I created a new folder on my E: drive named it SteamLibrary, within which the new SteamApps folder resides.
Once Steam is done allocating space and begins the actual download process, pause the download.
Right click on the game you just began downloading and choose Uninstall. The only reason we did this is to have Steam setup the default folder structure for our apps.
Exit Steam.
Go to the SteamApps/Common folder Steam just created for your download and delete any files or folders that the uninstall you just performed may have missed.
Move the UserData folder we preserved before into the “C:\Program Files (x86)\Steam” folder, overwriting any existing files.
Move the contents of the SteamApps folder we preserved before into the SteamApps folder Steam just created when we began that first game download.
Launch Steam.
Every one of your games now needs to be re-installed, but the way we’ve set it up Steam will skip downloading any files that already exist. With games that were working fine before, you should be able to click the Install button, let it verify the existing files, run all of its pre-install scripts, and then run the game.
With the games that were throwing errors, I recommend finding the starting binaries in each game directory and then deleting them. Delete the main game .exe and any Launcher type .exe’s as well, and then click Install. It will download the correctly customized/encrypted main executables you need to play the game, once it sees the old ones are missing.
Every game that was giving me problems came back from the dead after following these steps.
If you should happen to click install on a game that doesn’t already have its files positioned in the place you specify, it will begin downloading them. After that point, it will do you no good to copy the game directory into your intended destination. Steam will not recognize the appearance of the new files. It will keep downloading into a temp folder until it’s done and then copy over the files you just moved into place.
To correct this if it happens, you must pause the download and uninstall the game, copy the complete game directory into the desired SteamApps/Common folder, and then click Install again. If you see the “Discovering Existing Files” message, rather than the downloading progress bar, you have succeeded.
If this ends up working for anyone, let us know.
My method worked for me but I have allowed your comment in case it helps others.